Bryan Jenkins

Bryan Jenkins

0 followers
·
11 followers
Bryan Jenkins
More ideas from Bryan
Come accorciare un bullone, tagliandolo con semplicità, usando un avvitatore, una lama da seghetto HSS e della #ferramenta

Spin two nuts onto the bolt, tightening them against each other. Then chuck the bolt into the drill and hold a hacksaw blade against the spinning bolt. The nuts help to steady the blade and clean off burrs when you unscrew them.

The Family Handyman - Screws DIY Tip of the Day. Use this quick and simple way to get a screw started in a hard-to-reach place. Just poke the screw through a piece of masking tape with the sticky side of the tape toward the head. Place the screwdriver in the slot, then fold the tape up onto the screwdriver. Once the screw is well started, pull the screwdriver loose and remove the tape. by marjorie

poke the screw through a piece of masking tape with the sticky side of the tape toward the head. Place the screwdriver in the slot, then fold the tape up onto the screwdriver. Once the screw is well started, pull the screwdriver loose and remove the tape.