ELADE is one of the leading China silver chloride reference electrode manufacturers, and with professional factory we are able to provide you cheap silver chloride reference electrode with good quality.
#Copper #Sulfate #Reference #Electrode Application: It can accurate monitoring the #cathodic #protection status and measure the #sacrificial #anode’s potential; It acts as auto control stable signal source in impressed current #cathodic #protection system; It can be planted in the bottom of tanks or under the #roads; It can be pre-buried during the engineering and be used at a long time. http://www.eladeanode.com/copper-sulfate-reference-electrode
ELADE is one of the leading China copper sulfate reference electrode manufacturers, and with professional factory we are able to provide you cheap copper sulfate reference electrode with good quality.
In this EZkem video, we will demonstrate, step by step, how to disassemble an amperometric flowcell. First, turn off the pump, disconnect the wires and remove the amperometric flowcell from the system. Next, carefully remove and set aside the reference electrode. It's okay not to cover the top of the reference electrode if it's only going to be out for a few minutes. Loosen and remove all six set screws. Take the flowcell apart and carefully wipe and dry the flowcell.
ELADE is one of the leading China copper sulfate reference electrode manufacturers, and with professional factory we are able to provide you cheap copper sulfate reference electrode with good quality. Welcome to wholesale products from us.
Ag/AgCl Ink for preparing reference electrodes, especially useful for IDA electrodes.
After cleaning the amperometric flowcell, it is very important dry all parts thoroughly so that the flowcell seats together correctly. Next, feed in the set screws, tighten them down one at a time to a medium tension and continue until they are all secure. This will prevent leaking. Afterward, screw in the reference electrode securely to prevent leaking and flush it well to make sure there are no bubbles stuck inside.90147529067
Shaanxi Elade New Material Technology Co., Ltd which is a professional #titanium #anodes, #electrodes #manufacturer in China also attends Corrosion Conference & Expo NACE CORROSION 2016.It showes #sacrificial #anodes, #anodes for #cathodic #protection, #electroplating #anodes, #reference #electrodes etc. at booth 908.
Gamry Instruments Launched a New Online Reference Electrode Conversion Calculator