these wood slats are utilitarian in the way they are connected to the substrate — countersunk screws — but note the care in angling the top of the projecting pieces, so water sheds off the wood. contemporary exterior by Fougeron Architecture FAIA
Working Alone with Plywood - Woodworking Techniques - American Woodworker Tie a loop in each end of a 12 ft length of plywood. With the sheet up against a wall, slip a loop under the bottom corners. Normally you'd lift it from he same side as the rope.
DIY Tip of the Day: Cabinet Assembly Station. Here’s a third hand that will ensure square, no-hassle cabinet assemblies. Cut four long and screw or nail them to a plywood base, Good idea for stretcher frame
These blocks are like a spare pair of hands for assembling drawers and many kinds of cabinets. Make them out of plywood with dadoes the width of your stock. Forget the dadoes! 1 big square as the base + 4 small squares