Explore Lathe, Metalworking, and more!

Explore related topics

H-#2449 w/ Willis milling apparatus by Holtzapffel in the vertical position on the metal turning sliderest

H- w/ Willis milling apparatus by Holtzapffel in the vertical position on the metal turning sliderest

Phase II, oder die Mini-Bonelle

Phase II, oder die Mini-Bonelle

Milling part of the small four-stroke engine with sleeve valve control. Check out the custom made milling machine.

Milling part of the small four-stroke engine with sleeve valve control. Check out the custom made milling machine.

The lathe as drill, or driven by the use of tools on lathes

The lathe as drill, or driven by the use of tools on lathes

Monarch 1OEE close up. Note the dial indicator depth gage on the tailstock.

Note the dial indicator depth gage on the tailstock.

F.Lorch, Lorch Schmidt, L.S. & Co. Watchmakers' Lathes | Jewelers ...

Rebuilt Lorch, Schmidt & Co lathe (circa

Gingery Metal Shaper by leonane -- Homemade Gingery metal shaper constructed from metal castings and machined on a lathe. Fabricated in accordance with the Dave Gingery plans. http://www.homemadetools.net/homemade-gingery-metal-shaper

Homemade Gingery metal shaper constructed from metal castings and machined on a lathe. Fabricated in accordance with the Dave Gingery plans.

9x20 Lathe Retractable Tool Bit Holder

9x20 Lathe Retractable Tool Bit Holder

A ancient foot-powered metalworking lathe; I once read that in a large English "Engineering Firm" (i.e., machine shop), all apprentices were required to learn to use such a lathe primarily to teach them how important sharp tooling was. Notice that the lathe was designed to have flowing, rather decorative lines, rather than the boxy castings one encounters these days.

A ancient foot-powered metalworking lathe; I once read that in a large English…

Токарный станок С-1, Пензенского часового завода.

Токарный станок С-1, Пензенского часового завода.

Hardinge Cataract Vertical Milling Machine | eBay

Hardinge cataract vertical milling machine

Hardinge Cataract Vertical Milling Machine | eBay

stanok1.jpg;  600 x 450 (@100%)

stanok1.jpg; 600 x 450 (@100%)

2.JPG; 800 x 600 (@100%)

2.JPG; 800 x 600 (@100%)

Atlas Press Co. - Atlas 10-F TH42 Metal Lathe | VintageMachinery.org This is the same model as mine but is newer. This one was built in 1946 and its serial number is about 23,000 higher.

Photo Index - Atlas Press Co.

.dont know what it is but iam going to find out!

Nice old horizontal milling machine

Don Hoey, who made this lovely toolpost milling attachment, explains that "I made this to allow me to machine small complex parts, like the hollow gear cover shown, for my model Myford ML7 lathe. The mill mounts on the Super7 lathe toolpost, with power supplied from a Minicraft transformer. The large knob gives fine control over 3/4" of vertical movement." A visually stunning, beautifully executed device.

Don Hoey, who made this lovely toolpost milling attachment, explains that "I…

Pinterest
Search