Telecommunications network installation in Cuttagee on the Sapphire coast of far south eastern NSW
This is a Telecommunications & Network infrastructure installation contract for Lotus Building & Design that Waykat Services have just completed involving supply, installation & configuration of Equipment for NBN Co., Telstra NextG, Ubiquiti Networks & Vast Satellite TV.
A close up view of the high 250 kg mast sitting in a specially designed heavy duty gal steel tilt mast holder. This footing is deep, Sq filled with steel bar reo and heavy duty concrete
Another 10 ton anchor point for the 8.5m mast with High gain Telstra Next G 18dBi. 820-890MHz N jack, 1200mm dia, aluminium, installed in the cuttagee building held in place with plate steel build into solid timber roof trusses each anchor point has 3 totally seperate and indirvigual 2 ton breaking strain guy wires attached to it through 2 ton stainless steel carabiner connected to a 6 ton stainless steel carabiner loop.
1 of the three roof mounted 10 ton anchor points that Waykat Services installed in the roof of the cuttagee building to support 3 separate individual 2 ton breaking strain guy wires to hold the mast with the High gain Telstra Next N jack, dia, aluminium,
The deep Sq concrete footing that was put in place and filled with steel reo and cement to give the strength to hold the forces of the 250 Kg mast with the High gain Telstra Next G N jack, dia, aluminum in the extremely high winds, and the forces exerted.
A close up view of the 4th concrete footing that is 1m deep, 1/2m Sq filled with steel bar reo and heavy duty concrete designed to take all the external forces that mother nature can throw at it to ensure that the mast nor the High gain Telstra Next G 18dBi. 820-890MHz N jack, 1200mm dia, aluminium, grid antenna are able to more even 1 mm
Another view looking east of two hard working techs from Waykat Services after having put in the cement footings the day before and placed the the High gain Telstra Next N jack, dia, aluminum grid antenna start to sort out the many different guy wires.
2 x Waykat Service Techs working into the night on the 2nd night on site in Cuttagee far southern NSW start to erect the High gain Telstra Next G 18dBi. 820-890MHz 8.5m high N jack, 1200mm dia, aluminum grid antenna that will ultimately be pointed off to Carbargo in far southern NSW 27 Km's away
A view looking north to south with the Telstra High gain Next G 18dBi. 820-890MHz N jack, 1200mm dia, aluminum, grid antenna extended to it's maximum height of 8.5 M's in Cuttagee far southern NSW pointing off to Carabrgo in far southern NSW 27 Km's from the point of installation through some of the most inhospitable country.