Wallington Victoria 4G,LTE & Ubiquiti PtMP Project
This is a large Telstra 4G LTE fixed wireless data & Ubiquiti PtMP ( Point to Multi Point ) project that on the back of our many other successful fixed 3G, NextG & 4G LTE wireless and Ubiquiti PtP & PtMP projects Waykat Services were successful in winning on a large property in Wallington Vic.
Another view from behind the Ubiquiti Nanostation M5 looking back to the main office several hundred meters away used to access office apps, carry general internet & Email traffic as well as other Misc data after hours.
Another Ubiquiti Nanostation M5 located at another remote locations looking back to the main office again carrying remote internet, email and other data traffic after hours this is mounted on a 2.4M fascia J pole supported by 2 x 2.4m solid stays mounted at a 45 Deg angle.
A close up view of a Ubiquiti Nanostation M5 mounted on a 1.5M mast again on a tin roof setup at one of the remote locations pointing back to the main office mast with the 2 x 4G LTE grid antennas and the 2 x Ubiquiti Nanostation M5's so that remote internet & Email is able to be access after hours.
With the 2 x LMR 400 Coaxial Cables from the 2 x 4G LTE grids fitted off to the bacdk of the dual FME wall plate and the 2 x Ubiquiti tough outdoor ethernet cables also run and about to be fitted off to a dual clipsal RJ45 socket wall plate in readiness to receive the 2 x POE cables from the Ubiquiti nanostation M5 power injkectors
With initial holes cut in the tin in preparation to be fitted with rubber tektites to be fitted the initial cables to be run ar the 2 x LMR400 high grade low loss coaxial cables from the 2 x 4G LTE grids that will carry the mobile signal to the office and into the Sierra 320U plugged into the Dovado Pro
As one of our hard working and very decicated network engineers is hard at work building, constructing and mounting the 2 x 4G LTE grid antennas ground staff and busy getting the Ubiquiti Nanostation M5 equipment ready as well as getting LMR400 coaxial cables ready to be run.
On what was a very cold and wet day only approx 6 Deg c we started to build and mount the primary and secondary LTE grid antennas atop of a mast currently lying down and supported so as to make working on them a lot easier.
This is the Dovado Tiny that the Ubiquiti Nanostation M5 is connected to the Dovado Tiny has 1 x Wan port, 1 x Lan port, 1 x 3G / 4G USB port and also has A,B.G & N Wireless, the Dovado tiny gets it's I.P. address across the Ubiquiti link from the main office to be an extension of the main network then transmits and receives wirelessly
A distant shot of one of the remote home steads with the mast with a Nanostation mounted mon the roof pointing back to the main office located some distance away so that remote internet and email can be accessed after hours.
A Distant shot of the 2 x LTE grid antennas together with the 2 x Ubiquiti Nanostation antennas mounted on a special bracket attached to the office tin roof.supported by 2 x solid stays each mounted at a 45 Deg angle.
A close up view of the 2 x 4G LTE Grid antennas together with the 2 x Ubiquiti NanoStations M5 Point to Multi Point link antennas mounted on the same pole in Wallington Victoria pointing in 2 x different directions carrying remote internet and data traffic to 2 x remote locations.
The first part of this 4G LTE & PtMP communications project completed with the 2 x 4G LTE grid antennas & 2 x Ubiquiti PtMP links installed up & running pointing off to 2 x remote locations carrying remote internet traffic from the main office to the 2 x remote locations enabling internet & email to be access after hours.